Nostromo Incinerator Unit from ALIEN (1979)
Description
In celebration of the 40th Anniversary of ALIEN. I bring you a 1:1 scale Incinerator Unit Model Kit that I crafted in Fusion 360 resembling the unit from the film. https://youtu.be/dq1cWZE8QYw (I have always wanted one!) #"I am still improving this kit, so some parts may change." Please check log for updates\changes. Times are in EST. #Log: **2/20/21** A sizeable update today. Some parts received major updates for an easier and more robust build. A few notes: I reworked the pony tank valve and fuel_hex bar and added key holes to keep them from moving around. Added a sweet looking and more accurate knob for the propane tank. Added a valve head of the propane tank top. You can now use a P261P-D1 B10k 7C Potentiometer as a valve and place the new knob on it and use it for future electronics. Minor geometry adjustments on some parts. PARTS REMOVED: front_emitter_sparkplug_wire propane_mount fuel_pin_valve fuel_pin_valve_dial fuel_pony_tank_valve_release_pin PARTS UPDATED: trigger_mech_rear propane_holder_1 propane_holder_2 propane_can_top propane_can_bottom fuel_hex_bar fuel_pony_tank_valve front_emitter PARTS ADDDED: front_emitter_sparkplug_wire_head propane_holder_3 propane_holder_4 fuel_pony_tank_valve_2 propane_valve_knob **5/10/20** Added a photo of my current personal build. **6/1/19** Updated the following part: front_emitter_base.stl, Corrected the diameter, removed 0.05 of material. Part should now fit properly into body. **5/5/19** Updated the following parts: body_back.stl and propane_mount.stl with minor geometry fixes. @12:27pm Updated and fixed the following parts: body_left_front_face.stl, body_left_middle_face.stl, and body_left_rear_face.stl. @11:00am Fixed geometry errors. **5/4/19** Removed duplicate body_right_grill.stl, it was the same as grill_right.stl @ 11:16pm Added 2 additional render photos @9:10pm Updated body_middle.stl @ 8:12pm with minor change. Updated front_emitter.stl @6:11pm with correct model. oops. Updated body_middle.stl @ 4:46pm to correct minor duplicate hole error. Updated greebly_9.stl @ 4:19pm, was missing some details. Removed outdated duplicate part: fuel_white_tank_bottom.stl from 4/29/19, New one is from 4/30/19 As I do not have access to the original props, I relied heavily upon photos shared by user 8th_passenger of his hand crafted build. @ Propsummit.com link: "http://www.propsummit.com/viewtopic.php?t=4075" as well as movie stills and auction house photos. Without those reference photos this kit would be severely lacking in detail. A large portion of the files are little Greeblies, which you will glue into place. I have included a "map" pdf file to help you locate where they should go. If you have enjoyed building this kit please consider throwing some spare change in the tip jar! To all the Ripleys out there, enjoy!
Statistics
Likes
69
Downloads
0