Star Wars D-O Droid (Dynamic Build)
Description
My Star Wars D-O droid build designed to fit Ender 3 (23x23x25cm) size printbeds. It's still in the Beta stage. The wheel and side panels are OK but some internal mechanics may be changed in a few days. I will update these files frequently. Special thanks for DavidOx21. I've used his files as a template. If you are planning a static build, I'm strongly recommending his work. https://www.thingiverse.com/thing:3559890 For more information please join [our Facebook group](https://www.facebook.com/groups/840193652985020) NOTES ==================== * tire_ring_left.STL >>> file is also the Right ring. I didnt draw another ring for the right side. * tire_bumps.STL >>> print 2pcs for the both sides. * Sand paper, 3mm and 6mm Drill bits required due to tight references. * You can use CA glue to attach tire rings, bumps and big gear to the structure. BOM List ==================== * 2x MG14 mini servos * 2x Mini Digital Servo (for the head) * 6x 3x3x6mm bearings(inner diameter, width,outer diameter) * 6x 3x4x10mm bearings with flange. * 50x M3 8mm dome head hex screws. * 3mm carbon fibre rod (at least 300mm) FILE UPDATE SUMMARY --------------------- +UPDATE (15-05-2019) Cone.STL Updated Back Plate Head_Thin.STL Updated +UPDATE (5-05-2019) Axle_90.STL Updated head_counterweight.STL Updated +UPDATE (5-05-2019) pan_tilt_1.STL Added pan_tilt_2.STL Added pan_tilt_3.STL Added box_ankle.STL Added Head_Grill.stl Added Back_Plate_Head_Thin.STL Added Box.STL Updated and name changed from Box_out.stl + First Upload (28-04-2019) VIDEOS (Please Subscribe) --------------------- https://www.youtube.com/watch?v=5M4HQVyz1Fg https://www.youtube.com/watch?v=xBbceQ4vHUU
Statistics
Likes
128
Downloads
0