MP Select Mini 35mm Riser panels
Description
Inspired by falconman, but his design was not what i was looking for. So this design i made is for giving me some space for the meanwell PSU upgrade from Hackaday. The vanilla panels are for the printer without mods, just rising it up. Also there are half panels for those with smaller print area. Hardware needed: For the plate - 6X 35mm M3 Hex Riser - 6X 10mm M3 Screws For the board - 4X 35mm M3 Hex Riser Side panel with PSU mod: - 2X 10mm M3 screws - 1X M3 nut - Also will need the 2 small parts from USWaterRockkets: https://www.thingiverse.com/thing:1881464/files - Hackaday PSU upgrade. https://hackaday.io/project/14823-monoprice-select-mini-maximum-3d-printer-mods/log/48839-i-have-the-power Back Panel with cable chain - Rewiring the bed: 18 & 20 AWG wires and JST connector VH 3.96mm (https://www.amazon.com/gp/product/B00X772AXS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) - The Male to Male adapter - Back Panel with chain link: The Bed centered cable chain mount from Leesamn: https://www.thingiverse.com/thing:2198351 - The CableCchainLink.STL from Spauda01: https://www.thingiverse.com/thing:1167746/files Other mod Side Panel with Gantry and SD/USB extension: - https://www.thingiverse.com/thing:3594936 25mm Mainboard Mount - https://www.thingiverse.com/thing:3594925
Statistics
Likes
27
Downloads
0