Ender 3 (4040) tilt and swivel bracket for "Dooit TFT32 cover"
Description
This mount is designed for use with Ender 3 but should fit anything which has a 4040 frame. The only Ender3 mount I could see was password protected by the author so he could sell it. [Not in the spirit of thingiverse IMHO] So i came up with my own design which is better because it provides tilt and swivel. I have upgraded to a MKS GEN L and wanted to incorporate a TFT32 with the Motherboard box mount from "TeachingTech" (Great Ender3 youtuber) https://www.thingiverse.com/thing:3311643 My LH mount will slot straight over this thing. I designed this as a left hand side mount with a short bracket to minimise the offset but i have included right hand files and a slightly larger bracket which allows easier adjustment of tilt and swivel together. You will only need 2 M5x25 bolts and 2 M5 nuts for the assembly and another pair of nuts and short bolts for the case to bracket joint (or glue it). I have modeled this on the tight side so I suggest running a 5mm drill bit down all the holes to clean them up after printing. You will also need to warm the nut holes up with a hairdryer to soften them and allow a nut to be inserted. This ensures the nuts are a perfect fit. Do what you like with my files, sell them for profit if you like, no issues from me but if you remix this please give credit.
Statistics
Likes
25
Downloads
0