Magnetic bit holder with side magnets
Description
Instructions: ------------------------------------------------------------------------------------- Parts needed 8x2 mm round neodymium magnets = qty. 5 17x2 mm round magnets = qty. 2 Key Ring = 1 M3x23 Bolts =2 M3mm nuts = 2 Magnetic bit holder with magnets on the inside and outside. Print bit holder file first. It consists of 3 parts Place 8x2mm magnets inside the middle part round holes sandwich the part with magnets between two outside parts with polygon shape holes and bolt it together. Print Magnet side holder file, glue it with epoxy to the side of the assembly when it dries glue in also the large magnets. This way your bit holder will stick to metal objects while you are working on things. Slicer Settings ------------------------------------------------------------------------- I printed out of PETG Slicer used = Simplify 3D My settings for PETG are as follows: Infill = 100% Print temp - Extruder = 260 Print bed temp = 60 - but can be anything..even cold. Nozzle diameter 0.50mm Extrusion Multiplier 1.20 Retraction = checked Retraction Distance 2.00mm Extra Restart Distance 0.00mm Retraction Vertical Lift 0.60mm Retraction Speed 1400.0 Wipe Nozzle = checked Wipe Distance = 5.00mm Primary Layer Height = 0.0700mm Top Solid Layers = 6 Bottom Solid Layers = 6 Outside Perimeter Shell = 1 Outline Direction = Outside-in First Layer Height = 130% First Layer Width = 100% First Layer Speed = 40% Print quality is optimal.. no stringing at all. Guarantees perfect fit.
Statistics
Likes
3
Downloads
0