Pomona 3601 Box Lid For 15A Breaker
Description
I have been using aluminum Pomona brand project enclosure boxes for years. I end up drilling the faceplate for a specific project. When that project is done, the enclosure box is still useful, though the lid is now scrap. Rather than chuck the entire thing, I simply made a new lid from PLA. One file is the blank plate. The other is custom for a 15A circuit breaker. Some slight sanding might be required on the edges to tightly fit in the enclosure channel. My prints tend to have a slight elephant's foot for better adhesion, so I had to shave the lid a little. I've included the Fusion 360 files, feel free to modify for your projects. The Pomona box I'm using can be sourced here: https://www.digikey.com/product-detail/en/pomona-electronics/3601/501-2382-ND/736527 The 15A circuit breaker I'm using can be sourced here: https://www.amazon.com/ZOOKOTO-Circuit-Breaker-Inverter-Waterproof/dp/B077DZ3JX9/ref=as_li_ss_tl?keywords=marine+breaker+15a&qid=1555941724&s=gateway&sr=8-4&linkCode=sl1&tag=2manytoyz-20&linkId=85e7f1389f79c94e65d66a10f9a26dd0&language=en_US As an Amazon Associate I earn from qualifying purchases.
Statistics
Likes
4
Downloads
0