Geeetech A30 Micro SD Holder/Extension
Description
I made this to act as a holder and a cover for this micro SD to micro SD extension cable. It screws to the side of the control box for the A30 using (2) M4 x 30 hex cap scews. The extension ribbon must be folded multiple times in the holder to make everything fit nice. May need to be wrapped once or twice with some tape to ensure a snug fit in the holder. This holder allows for easier access to the SD slot. The holder also allows for less space necessary on the right side for the SD slot is facing forward. I would rather have it be a micro SD to SD adapter to make putting files on with my laptop easier. If you want to try that you should be able to use this cover with a few tweaks. Micro SD to micros SD Extension cable: https://www.amazon.com/gp/product/B01D9J8KQE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 You can find the screws I used to attach to the control box in this assortment, or you can buy just M4 x 30 screws. Personally having a good assortment of bolts/nuts is invaluable when it comes to 3D printing, well worth the investment. Especially cheaper than buying the bolts/nuts on a need to have basis. Metric cap screw/nut assortment: https://www.amazon.com/gp/product/B071KBVZVV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Statistics
Likes
6
Downloads
0