Hawkeye Firefly Micro Cam 2 TPU Mount
Description
### Hawkeye Firefly Micro Cam 2 TPU Mount (chair, bed, seat) This is a _completely original_ design by nerdCopter. The Hawkwye Firefly Micro Cam 2 was released, but the included hard-mount causes mega-jello. The Micro 2's rollings shutter is highly susceptible to jello, especially 30fps. Only 60fps is recommended. Provided here are 3 "seats" for your Micro Cam2 with 30°, 35°, and 40° angles. The seats are 30mm wide with a 44mm seat (about 38mm of seat surface plus curvature). The wall thickness is 3mm and hopefully not too thick to dampen vibrations. EDIT1: I was forced to inch my camera up as forward as possible to avoid the lipo battery, so i may have to design an extended version 2. But this is still usable with a proper strap. (read as: trash the included straps and find a good wide strap instead. just click the power button through the strap and listen for the beeps.) EDIT2: I found the wall-thickness to be very good, but there is still some left-right movement. I have found that stuffing the void with high-density foam helps. I use the high-density foam from a curtain rod packaging. It is the same material found in the EMax motor packaging and the Eachine VTX packaging for reference. However, you may need to find a proper size material and cut to shape. Cut it slightly large to stuff it tight, not loose. The mount should be zip-tied (or better) to your quadcopter, and the camera should be velcro'd with upgraded velcro-straps and silicone shielding. The included velcro straps will break before long. This is used on my iFlight XL7 and my Screech 5/6. I used double-sided foam-tape to attach, then triple, maybe quadruple, **zip-tied** to the frames. The sticky-tape should slightly dampen vibrations also. I found that my TPU mount for my original Firefly Cam v1 did NOTHING to protect it from a _*hard*_ crash, so why bother with a box!??! --- - If you enjoy this, please "Like" or comment. - Please post "Makes". - Feel free to promote it using the [attribution card](./attribution_card). - Please consider subscribing to my [Youtube](http://youtube.com/c/nerdCopter). - All my works under the `Creative Commons - Attribution - Non-Commercial - Share Alike` license unless otherwise noted. - Free to print for yourself or your friends. Please do not commercialize without consent or agreement. - If this is a remix, please follow original designer's limitations as well.
Statistics
Likes
4
Downloads
0