CNC Router Cam Clamp
Description
When cutting smaller stock, any clamps I used got in the way of the dust shoe. I designed these for use with 1/4" T Track bolts. This Cam Clamp is only 10mm high, well below the surface of any 3/4" stock. The knobs are out of the way from the dust shoe. The angles on block and cam surfaces, keep the clamp in place There is about 4mm movement from the cam. I use 2 fixed blocks to position the stock. The use 2 cam/blocks to press against the fixed blocks. .
Statistics
Likes
22
Downloads
0