Ultra Compact Raspberry Pi 3 and 4B 80mm Fan Cooled Enclosure Case Octoprint
Description
This is an ultra compact enclosure case for Raspberry Pi 3 units with active cooling using a 80mm X 10mm 5v 0.25A cooling fan (not 12v) and a few screws to assemble. Awesome for PressPI server, OSMC media player, Raspbian computer, or other applications requiring a case and active cooling! COMPATIBILITY Works with the following Raspberry Pi Models: - Raspberry Pi 3 Model B+ - Raspberry Pi 3 Model B - Raspberry Pi 4 Model B (untested, same mounting holes, different connectors) FEATURES: - Super simple one piece design - Access slot for SD Card and all ports. - Screw mounted Raspberry Pi and 80x80x10mm low voltage fan INSTRUCTIONS: - Print case body - Print fan cover (optional), use your own, or go bareback! - Buy Raspberry PI Model B or B+, Micro-SD card, and a high quality 5V==2.5A PSU - Buy 1-2 80x80x10mm Cooling Fan/s (eBay for like $7 to $10, we sell as arbeitspferde) - Connect your fan to the GPIO pins - Mount the board and 80mm fan using a few misc screws Rendering below shows an 80x80x20mm fan; unfortunately, it consumes more energy as there's more mass to rotate which upsets the Raspberry Pi 3 models voltage system if powered using the GPIO pin out. Thus, we swapped it out for a low voltage 80x80x10mm fan - all is well!
Statistics
Likes
34
Downloads
0