Gandalf the Grey - Lithophane
Description
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 176mm x 164mm x 6mm (6.92 x 6.46 x 0.24 inches). Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a large and detailed stl file and may put some systems/slicers under pressure. It slices best in Slic3rPE, Cura 3.6+ or S3D. __A note on slicing in Simplify3D:__ It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users). If you want to use Simplify3D you just need to do the following: Load the lithophane STL into S3D as normal. Click Mesh–Separate Connect Surfaces Slice as normal The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether. If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model. Check out more on my site: https://www.gadunky.com/
Statistics
Likes
88
Downloads
0