Schwinn Meridian Trike Truing Adapter
Description
I recommend printing 4 (how often do you drop you truing wrench?) This was designed for a Schwinn Meridian to true the drive wheel. to be used with a spare QR skewer Don't clamp down on them in the truing stand as this was intended to roll on the smaller shoulder. I successfully built 3 sets of wheels on these adapters and this file is revision 2 ... EDIT: 11/2021 Revision 3 has been to use these spacers with the "thruaxle" to get the truing arms away from the spoke heads. it's still not a perfect solution but does get a solid B. I finish truing on the trike with a ziptie to the basket as a rim guide. PRINTING: Rotate 45 degrees so the chamfer on the flat side rests on the print bed. add supports to bed only. I had to shrink by 2% to get a decent fit.
Statistics
Likes
2
Downloads
0