Bunny Base for Rabbit Pulling Carrot Doorstop
Description
Our bunny was just a little to short for the gap under our door, and PLA slips easily on tile. So we gave her a little base to lift her up and give her a little more traction. These parts are based on the [Bunny Rabbit Pulling Carrot Doorstop](https://www.thingiverse.com/thing:3475755) model by [CaptObvious](https://www.thingiverse.com/CaptObvious). This is printed in Flexfill 98a. With 0.2mm layers and a 0.6mm nozzle it took about 3 hours to print. Flexible materials print very slowly. Super glue seems to be holding it all together well so far. I clamped it in a [(printed) vise](https://www.thingiverse.com/thing:2064269) while it set. This STL file is 10mm tall, which should be more than enough for most door gaps. The photos show a 5mm printed height. There is plenty of [software](http://www.meshmixer.com/) out there that should be able to do [a basic plane cut](https://blog.prusaprinters.org/cut-stl-models-3d-printing-meshmixer/) so that you can choose the exact height you need without needing any complicated software. Your slicer may even have a plane cut feature.
Statistics
Likes
20
Downloads
0