PROMEGA V6 BMG CONVERSION SINGLE EXTRUSION SETUP
Description
I have revised the extruder mount to have a slightly thicker profile to add improved rigidity due to some great feedback from members who have printed and tried it. I think it will still fit the same just less gap between the bondtech extruder and the face of the extruder mounting part. Please let me know if you printed this out and tested it. All feedback is good feedback. https://www.facebook.com/groups/1156304777857840/ 3 STYLES So make sure you are downloading and printing what you want. -1 with a vent system for a blower. -1 without. -1 with vent system mirrored 1st style is the Promega direct walle replacement for a bondtech extruder. It comes in 2 parts. The part that replaces the walle and the part that mounts to the walle replacement. I added slots for nuts if you want additional holding power rather than relying on the screw holding to plastic. I only gave a .2 tolerance so you may have to press the nuts in with a vice or a pair of pliers. 2nd style allows for a 40mm blower on the back and adds ducting and a vent for nozzle cooling. You will need to change your Y dimensions in order to use this mod. This is untested by me but requested by others. Ok, good luck, have fun and leave a comment.
Statistics
Likes
12
Downloads
0