Nickel band dispenser V2
Description
This is version 2 of the nickel band dispenser for those thin 0.1-0.3mm nickel welding strips for making battery-packs. The dispenser was constructed in Fusion 360. The inner-part of the lid is also made for windiwng up the Strip to easily get it transferred into the dispenser. but keep in mind to remove the Strip from the slit before inserting it into the dispenser. if you don't you may not be able to pull the strip out of the dispenser. It is recommended to use the adaptive layer height in cura to minimize the print time. in the zip archive are 6 files, one for 5-7mm with, one for 7-9mm and one for 9-11mm
Statistics
Likes
4
Downloads
0