3s 18650 pack for fpv goggles
Description
I got tired of my skyzones alarming at 50% of li-ions' capacity and powering off (~6.9v) 3s works good, just set the powersource to 2s or dc-in and watch out for the end voltage, it will be something like 9.5v. Mine shows reading +0.1v under load, so check yours with a voltmeter, before you decide when to power it off at. NOTE: it is a nonseparable pack. You have to solder the cells and use glue to assemble the case! !!!!!!!!!!!!!!Printing notes!!!!!!!!!!!!!!!! Suggested materials: Grommet - any flexible Other parts - any hard plastic, i prefer ABS - acetone solution fuses everything together nicely Upscale up_cap , cap, bottom_cap to 101%, otherwise it wont slide on the core part. You can print all these 3 parts at once.
Statistics
Likes
65
Downloads
0