Vidroc 808 Swinger & Flippa
Description
<h1>Vidroc Swinger and Flippa</h1> After designing the [Vidroc 808 BT-50 Nose Cone mount](https://www.thingiverse.com/thing:3460319) my friend Evan Curtis said <i>"Hey this should swing down when recovering"</i> and thus the 'Curtis Swing' was born. (but simply called "Swinger" here) Designed to work with most [808 cameras](https://www.amazon.com/Keychain-Camera-Motion-Activated-Portable/dp/B01E5HDXF2/ref=sr_1_fkmrnull_2?keywords=matecam+808+camera&qid=1557265160&s=gateway&sr=8-2-fkmrnull) these nose cones also allow the camera to flip or swing to look down towards the ground when they're under chute. - The Swinger uses a short piece of filament as the axle and the Flippa uses a segment of paperclip. - The Flippa does require a small screw (like a servo mounting screw) to stay in the camera sled. - The Fippa nose cone pretty much needs supports to print properly (or maybe tilt it back a little) - The Flippa camera sled has a small lip that tucks into the BT50 to hold the camera in place during launch. Here are the Fusion 360 files [Swinger BT 50](https://a360.co/2JqdDXM) [Swinger BT 60](https://a360.co/2VrIMRW) [Flippa BT 50](https://a360.co/2Jp2nus) If you build and fly one of these PLEASE link video in the comments! Thanks!
Statistics
Likes
8
Downloads
0