RC plane base (powerpod)
Description
Its simple and easy print powerpod for 2212 or else motor. Its need 2 servos 9g; 2212,2208 or else motor, esc, and lipo max size (31x34x120mm) Also u need screws m3x6mm - 4pcs, and m3x16mm - 4pcs I`m using ABS filament, but i think u can use PLA or PETG :) Powerpod consist of 2 parts: base and motorholder. Its no req supports, layer is 0.2mm, nozzle 0.4mm Final mass with all equipment is 250g
Statistics
Likes
17
Downloads
0