SKR 1.3 / SKR 1.4 - P3STEEL OrballoPrinting BOX
Description
Last version: 03/20/20 (In the photos it is version 2, version 4 not yet tested.) Update 05/30/202: (v4.5) Thanks to "Tgunn" who showed me that there was a problem with the card (we could not get it because of the screws holding the door) . So I increase the height of the retaining screws and it looks correct now. Hi, I tested my previous versions (now deleted) and I encountered a lot of problems. Here are my latest versions: -v1: Compared to the original: slots for nuts, slot for SKR 1.3 and SKR 1.4 card with slot for SD card and peripheral port. Door modified to have more length for the X axis cable. -v2: Same as v1 but with two screws at the top of the model to be able to properly close the box -v3: Remix of v2 but with the cable holes at the bottom of the inverted model: the LCD screen is on the right and not on the left as well as the power and motor cables Z1 / Z2. -v4: The most successful version to date is v4. The cover of the box closes with 4 screws. Here's all it improves: power cable away from LCD cables, so no disruption. Lightening of the support for cable Y, to be able to fit the SKR 1.3 or SKR 1.4 card. Locations for nuts (non-return nuts) to better hold the box to the P3TSEEL chassis from Orballo Printing. Lid modified to have more length for X-axis cables, inversion of the order of cable locations at the bottom of the model (power supply on the left, Z cables in the middle and LCD on the right). If you like my work don't hesitate to like and follow me. Enjoy!
Statistics
Likes
83
Downloads
0