S800 Nose and Canopy for fullsize Falkor and GoPro HERO7 - VERSION 2
Description
Update 2020-07-24 Enlarged the cutout for the HERO7 0.25% as it was a bit tight. Nose for S800 sky shadow with camera mount for full size foxeer falkor 1.8mm and GoPro HERO 7. This is my own design from the ground up but its inspired buy PlayerOneFPV Credits to Oscarko for the GoPro Hero 7 model that I used for cutting. Use 100mm of piano wire or similar for the hinge. Nose is printed on its back with the camera pointing up, supports everyware. canopy is printed standing up with the hinges pointing up, supports everyware. I used a 10mm brim when printing the canopy in petg, good bed adhesion is manditory! Use the print settings and orientation described here https://www.thingiverse.com/thing:4008697
Statistics
Likes
6
Downloads
0