Case for LT1083 linear regulator module
Description
This is a case for LT1083 linear regulator module kits you can find on eBay - specifically [here](https://www.ebay.com/itm/LT1083CP-Linear-Adjustable-Voltage-Buck-HIFI-Regulated-DC-Power-Supply-DIY-Kits/112019068775) or [here](https://www.ebay.com/itm/1PC-High-LT1083CP-PRO-HIFI-Linear-adjustable-regulated-DC-Power-Supply-DIY-Kits/232432764581). Similar linear regulator modules may be compatible if PCB size and screwholes are the same. You will need two PG7 cable glands and four M3 screws (the same kind of screws used in computer cases to secure the drives). The cable glands are used the firmly secure the cables at the ends; the screws are to secure the PCB inside the case. Alternately, I uploaded some versions with different sized input holes to accommodate various 5.5mm sockets instead of a cable gland. However, I haven't actually tested to see if these are sized correctly - or if there's enough clearance between socket and PCB. All versions still use a cable gland on the output side. Of course, you'll also need an AC adapter, cabling, and connectors that are necessary to make the module work for your application. Standard disclaimer applies: use at your own risk. I am not responsible for harm or damage caused by the use or misuse of the finished project, or of the LT1083 modules, equipment, or parts used in this project or connected to the project. Do not proceed if you don't know what you're doing or cannot accept any and all risk involved.
Statistics
Likes
10
Downloads
0