Tailstock for small lathe
Description
Tailstock for small lathe with 775 12 volt motor, you need a 22 mm ball bearing with 8 mm hole, a piece of 8 mm threaded bar, a 3D printer, place a nut at the beginning of the threaded bar and drill through with a 2 bit / 3 mm, I used a 2.5 mm one, then I inserted a piece of a rivet pin in it and welded it with tin, then I cut and filed to shape the shape of the nut well , then insert the interlocking nut into the seat of the 3D print, and fastened on the opposite side with a nut. Then insert the bearing, with a piece of 8 mm iron bar, make the tip as in the picture and insert it into the bearing, the tailstock is so complete, I kept the long threaded bar so as to then cut it to size, the project will follow of the sliding piece for the tailstock, also printed in 3D.
Statistics
Likes
3
Downloads
0