Cosmos Drawbot 1.0
Description
The Cosmos drawing bot. Made out of stuff laying around. Everything made as compact as possible no need for ekstra inkscape extension Use the attached template import your foto (or draw something) Trace bitmap ctrl+j ctrl +k extensions-gcodetool-path to gcode open and send the gcode with your favorite gcode sender (i use SourceRabbit GCode Sender) Print settings. Layer height 0.3 Layer width 0.5 Outlines 2 Infill 25% PLA Easy printable, no support needed. BOM 2 x 450X8 smooth rod (x) 2 x 350X8 smooth rod (y) 2 x 70X3 smooth rod (almost in any cd-rom drive) 1 x spring from a ball pen, cut in half 8 x m8uu or lm8uu bearings 5 x 608zz ball bearings About 1.8 m gt2 belt Arduino Uno v3 GRBL cnc shield 2 x A4988 drivers 2 x Nema 17 Stepper Motors 2 x gt2 16 teeth pulleys (use what you have with your own settings) 1 x Smalle servo (sg90) 1 x 12V 2000 mah power supply 1 x 5v 40X40X10 mm fan Misc m3 nuts and bolts Everything is fitted tight in the box. Assembly the controller box in this order, was easiest for me. wires connect steppers and servo put in Uno+grbl fan connect fan lid IF ANY QUESTIONS, DO NOT HESITATE TO ASK If you like me design, please donate my next cup of coffee https://www.paypal.me/rcmn
Statistics
Likes
69
Downloads
0