Hexadecibel r10.11 | Anycubic Linear Plus Acrylic Enclosure
Description
**What Are You Doing?** I'm currently designing an enclosure, using 210*597mm acrylic panes. Theoretically, you could use 4 A4 panes or a every long panel except for the front two (the doors). There is a 2020 style extrusion profile on the beams so that you can mount things using t nuts. You don't have to tighten them much to get them to bolt on. Please comment any feedback. r[X] is the revision number of the thing. **Here's The Timeline** [¬ = Updated, + = Added, - = Removed, ! = Currently being designed] [14 April 2021] (r10.11) - [+] Added acrylic panel height information [25 November 2020] (r10.1) - [¬] Updated all STL Files. - Pushed that off for far too long considering it took almost no time at all. - [¬] More recent cover photo [23rd June 2020] - [+] Added step file [21st June 2020] (r10) - [¬] Renamed Hexadecibel - [¬] Corrected Fusion 360 Source File - Corrected corner bracket alignment - Cleaned up file - Other adjustments - [ ! ] The new stl files haven't been uploaded yet [8th May 2020] - [¬] Renamed HexaDecimal - [¬] Added r9 (revision 9) to the title - [¬] Changed filtration device - [ ! ] Realigning corner brackets [10th Feb 2020] - [¬] Officially named HexaDecibel [15th Oct] - [+] Added LED ring to BOM list - [¬] Hinge [25th Sep] - [+] Fusion 360 Source File - v58 has a few issues but should be fine for most uses. [21st Sep] - [+] Bottom Cover - [¬] Hinge - [¬] RGB Screen Holder - [¬] Bottom Corner Front - [¬] Top Corner Front - [¬] Top Corner Back [10th September] - [¬] Print list to correlate with names of the files. [22 August] - [¬] Feet - Added extrusion profile [16 July] - [+] Door clip [22 June] - [+] Images of Stage 1/3 complete - With 2 being the spool holder and 3 being the lighting and filtration systems - [¬] Bottom Corner Back - [¬] RGB LCD holder [21 June] - [¬] Feet - [¬] Top Front Corner - [-] Bottom Corner Base - [¬] Top Front Tile - [¬] Hinges [20 June 19] - [¬] All existing files (had to be redesigned twice) - [+] Remaining files needed for the main enclosure part of the project - [Not fully printed and tested] [12 May 19] - [+] Created Thing - [¬] Top Corner Front - [+] Font Beam Middle **Print List** Main Prints: - 2 Back Beam and 1 Back Beam Middle - 4 Front Beam (mirror 2 for other side) and 2 Front Beam Middle - 1 Bottom Corner Front, 1 mirrored Bottom Corner Front and 1 Bottom Corner Back (same for top) - 1 Filament Guide (to insert short PTFE) - 3 Bottom Tiles - 2 Top Tiles and 1 Front Top Tile - 2 Bottom Tile Top and 1 Front Bottom Tile - 1 Fysetc RGB LCD screen holder if you have one - 3 Bottom Covers Other Prints: - Effector cover, wire harness and 5015 fan holder: https://www.thingiverse.com/thing:3898076 - Tensioners: https://www.thingiverse.com/thing:3155015 - 25cm Glass Holder: https://www.thingiverse.com/thing:3303881 - Motor Covers: https://www.thingiverse.com/thing:3625644 - Other Feet: https://www.thingiverse.com/thing:3625464 - SKR holder: https://www.thingiverse.com/thing:3685481 **Parts List** Main Enclosure - Quite a lot (100pcs should be ok) of 8mm M4 bolts and t-nuts: https://ebay.us/cgqGtb and https://ebay.us/MUGbMK - 6 21x59.7cm 3mm panes, but you may want to get 60cm (or the distance between the bottom and top extrusions - 1 or 2mm) if you're not going to be sealing the edges: https://plasticonline.co.uk/cut-to-size-plastic/acrylic-sheet/acrylic-sheets.html - You should also be able to use 8 A4 3mm panes for the back panels - 33ft/10m Car U Shape Seal: https://ebay.us/f0RQQN - 20mm square rubber adhesive feet Light, Filter and Filament Holder (coming soon): - 1 20cm diameter 3mm thick acrylic disk. Opal or frosted. - 2 6" / 6.3" 5V LED rings **Printer Configuration** - Control Board upside down so that the PSU can be mounted on the back. Print https://www.thingiverse.com/thing:2941653 for cooling. - Alternatively, you could extend the wires from the PSU, or mount it on one of the the front towers. - FYSETC RGB LCD Screen (I'm using a BIQU SKR so I can use a graphical display)
Statistics
Likes
223
Downloads
0