Aerodynamic 808 keychain camera mount for 4 inch rockets
Description
This is a one-piece aerodynamic low-profile shroud for a generic 808 keychain camera. This will fit a 4 inch (102 mm) airframe. I wanted to build one that would stay on the rocket at supersonic speeds without causing unwanted aerodynamic issues. I used a little velcro to stick the camera inside the housing, and then taped over the top with clear packing tape. The entire shroud was fastened to the rocket with a couple of loops of clear packing tape. Flew this on my level 3 certification, which reached Mach 1.3 Second photo shows the rocket and shroud after the flight. Print standing on its end with a raft or brim. I didn't need supports, but your printer/filament may require them.
Statistics
Likes
5
Downloads
0