Drip Shaped Weight/Ornament
Description
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domcontact.wixsite.com/3dom I needed a small weight to put under a hanging sprinkler, which helps keep it vertical. I ended up deciding on the simplest shape, water droplet. I chose this mainly because it was easy and would not be a eye saw in the back yard. But it also amused me a little. I have attached the GCode I have used and a Fusion 360 Project Archive if you want to change the size. I can help with this if needed. This model is only one half. Simply duplicate the shape in the slicer to get both sides. I opted for the full half and printed it in this orientation to have the layers and material runs to be continuous through the loop end. This should add extra strength as it is not dependent on a single layer, which if one fails, so would the whole loop.
Statistics
Likes
3
Downloads
0