MeanWell RS 150-48 Case One
Description
Just another quick'n'dirty "designed" simple Cover for the [Meanwell RS 150-48](https://amzn.to/2VnpKH9) PSU, which works for me together with a [DPS 5015 Module](https://amzn.to/2HubSWT). I use [Silicon / Rubberfeet 10mm Diameter](https://amzn.to/2Hohemw) to avoid the Case from slipping around the Table. Recesses on the undersides are prepared. The Terminal Binding posts are some [cheap ones](https://amzn.to/2WOsPSt), for internal wiring I've used [AWG 18 Cables](https://amzn.to/2LGWZWk). You also need some Screws: * 4pcs. M3x20mm Countersunk Screws to attach the front Plate with the Case. (Threads in are prepared in the Case.) * 2pcs. M3x16mm Countersunk Screws to attach the Switch to the Front Plate (Brackets for the nuts are prepared) * 5pcs. M3x10mm Cylinder Head Screws to attach all Parts with the Power Supply. I recommend following sets of screws, so you have enough of them for the rest of the Week ;-) : [460 Countersunk Screws](https://amzn.to/2VGSiRd) and [1080 Cylinder Head Screws](https://amzn.to/2VrUAP4). Printed with my [AnyCubic i3 MEGA](https://amzn.to/2QUVd6w), with Filament from Goedis: [Black PLA](https://shop.goedis.de/PLA-Schwarz-175mm) and 3dJake [nice ABS red](https://www.3djake.at/3djake/niceabs-rot). * PLA: 25% Infill, 0.2 mm Height of Layer, 93% Flow, 215° Nozzle, 60° Heatbed and 60% Cooling. * niceABS: 15%Infill, 0.2 Height of Layer, 93% Flow, 215° Nozzle, 90° Heatbed and 10% Cooling. Some of the links are Affiliate. If you buy something, I get a small commission. The price you pay is the same. Thank you.
Statistics
Likes
12
Downloads
0