NYM84 Mechanical Keyboard Plate
Description
It's still a bit of a WIP, but hey, it's free :) **Printing** I went with .3mm layer height and 40% infill using Solutech PLA. This produced a nice, hefty result fairly quickly. **Post production** If you end up having to print one half at a time like I did, you will need to remove material from the split area in order to join the halves. Just do it in small increments and keep checking the fit...it goes fairly quickly. **Stabilizers** The plate is only compatible with PCB-mount stabs. **Mounting screws** You will need longer M2 screws for this to work. I used the 8mm screws from an [iExcell set](https://www.amazon.com/gp/product/B07FLLGW19). **Silencing** There's room for sports tape or something similar between the plate and PCB. In case it helps, here's [my build log on Imgur](https://imgur.com/a/cZNHXwM#Iep6PbT) This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4yxOwbqauvd
Statistics
Likes
8
Downloads
0