808 #16 camera box with wide angle lens and mobile phone battery
Description
## *I Wanted Longer Battery Life And A Wide Angle Lens For My 808 #16 Keyring Camera So Made This Little Box. May Fit Other 808 Cameras But I'M Not Sure.* ## **This Is An Early Work In Progress So Please Don'T Expect Too Much From It If You Decide To Try It Out. I Won'T Upload Fixed Printable Stl Files For Every Version, You Can Create Those Yourself If You Wish Using The Included Sketchup File.Your Printer Will Need To Be Set Up Pretty Well To Print This Item Properly.** ## -Uses My Wide Angle Lens Files To Create A Perfect Hole For The Lens To Sit In. Thing:470031 -Fits A Nokia Blb-2 3.6V 700Mah Battery To Make The Camera Run As Long As It Takes To Fill Up A 32Gb Microsd Card. -Please Recharge Your Phone Battery Using Your Original Mobile Phone And Phone Charger, Not Inside The Box. I Am Not Responsible For You Burning Down Your House When Trying To Recharge It Using The Camera'S Usb Cable Or Whatever Method You Choose To Use. -You Will Need To Remove The Internal Battery From The Camera And Extend Some Wires Down Into The Battery Compartment. Flat Copper Connections Are Advised And Should Be Glued Into The Small Recesses. ## Things To Do: -Improve Ease Of Battery Terminal Access -Access Panels (Battery And Lid) Need Redoing -Spit & Polish -...Etc. ## Changelog: **V2** 19/9/14 (As Per Photos) -Added Hinge Mechanism For Lid. -Added Battery Flap **V3** 21/9/14 -Improved Battery Flap -Battery Should Now Move In And Out Smoothly -Created Larger Channel For Easier Battery Wire Installation **V3.1** -Button Holes Added To Lid -Smoother Access Hinges **V3.2** 22/9/14 -Recessed Button Area -Lid Hinge Fixed -Lid Resized To Fit Properly -Strengthened Wide Angle Lens Recess **V3.3** -Slightly Cleaned Up Model -Repositioned Battery Wire Channel For Easier Installation Of Terminals -Added Wire Channel For Neater Look -Raised Bridge Area To Protect The Lens When Attached **V3.42** 24/9/14 -Stronger Bridge Area -Slight Tweaks **V3.44** 27/9/14 -Changed The Lid To Be More Secure. Now Requires A Small Flat Bladed (Jewellers Type) Screwdriver (Or A Bent Paperclip) To Remove It. Insert Into Hole At Lens End And Push Screwdriver Tip Away From Lens To Unclip. ## Have Any Suggestions? Please Let Me Know.
Statistics
Likes
10
Downloads
0