Anycubic I3 Mega pi wide-angle camera hotbed mount
Description
Modified the original camera mount (1.stl) to accommodate a camera board with wide-angle lens (~16mm in diameter and placed in the center between the 4 screws) Depending on the mounting of the camera/lens on the PCB, the back piece (2.stl) can't be used and the camera needs to be mounted using 2.2x6.5mm self-tapping screws (and possibly little spacers if not using the wideangle_led version). If you don't want to add spacers in case your lens mount doesn't allow the camera to sit flush or if you want to also mount IR LEDs, use 1_wideangle_led.stl instead. The camera used in the photos is this one with a 130° wide-angle lens: https://www.amazon.de/gp/product/B07BQRWXVG The connection between the heatbed mount, arm and camera enclosure is done using 2 x M3 16mm screws and nuts. Update: I added two alternative hotbed mounts that clip on instead of having to be held in place with screws (which are difficult to access..) - a small one (based on the handle from Andybx) and a new version with a bigger ring and centered camera mount.
Statistics
Likes
28
Downloads
0