BLTouch center mount for Maker Select Plus and Variants
Description
I am calling this a remix as I took the idea from this mount - https://www.thingiverse.com/thing:3534775 This, however, is a complete redesign. Why do you need this instead? The original design sits ~3 mm lower than desirable. I eliminated the top roof from that design and instead of a slot to push BLTouch into it, I created a negative space for it to sit into and space for wires to be routed out in the front. It needs only two M3 screws & BL touch sits almost exactly 8mm high from build surface now. I used a modified ADVi3++ to adjust the distance from the nozzle. Here are the offsets I used : X: 0 Y: -39 Z: -.5 You'll need to adjust Z after installation from the LCD using the Tuning/Sensor/Z-Height function. If you wanna know what changes I made to ADVi3++ here is the video I used to learn everything you need to know from Teachingtech - https://youtu.be/BV11-VOQjMc EDIT: If this sits too high for your printer: I added two new shims (2mm & 3mm) with matching mounting holes that you can print & sandwich it between the mount and the metal part. You can scale the Z in your slicer for a different thickness shim as well.
Statistics
Likes
29
Downloads
0