Plotter ver 2
Description
Plotter version 2 ## Material: - Arduino Uno R3 - GRBL Shield V3 - 2 Stepper Motor 1.8 degree - 2 Stepper Driver A4988 - Tower Pro SG90 9g Micro servo ## Setup - Download Arduino IDE from https://www.arduino.cc/ - Install and Open Arduino IDE - Import MIGRBL.zip to libraries: Sketch > Include Library > Add .ZIP Library... - Selected MIGRBL.zip to import - Connect Arduino Uno R3 via USB cable, select File > Examples > MIGRBL > grblUpload - Select correct information for board from Tools: Board: "Arduino/Genuino Uno" Port: USB port for Arduino Uno Programmer: "AVRISP mkll" - Click to button Upload ## Gcode Editor Tools Setup - Download and setup Inkscape version 0.48.5 (https://inkscape.org/release/inkscape-0.48.5/) - Unzip tools/MI Inkscape Extension.zip and copy all of file to inkscape extensions folder MAC: ~/.config/inkscape/extensions/ WINDOW: ... ## Gcode Sender Tool - GRBL Controller: https://github.com/zapmaker/GrblHoming/releases ## Demo - https://www.youtube.com/watch?v=Rj0R-PmCwWo ## Download All in One - https://github.com/diy3dvn/grbl-plotter
Statistics
Likes
91
Downloads
0