Creality Cr10 Micro SD to SD Adapter v2
Description
( This is a new version v2 ,now with big chamfered edges to get it to be more aesthetic looking the old one you can get here : https://www.thingiverse.com/thing:3252444 ) If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : <a href="https://www.buymeacoffee.com/Mb1vZjXUG" target="_blank"><img src="https://bmc-cdn.nyc3.digitaloceanspaces.com/BMC-button-images/custom_images/black_img.png" alt="Buy Me A Coffee" style="height: auto !important;width: auto !important;" ></a> Changed my Cr-10s to accept SD card (instead of the micro SD ) via an adapter from china . Instead of having the cable and SD housing laying dangling by the side of the control unit ,i decided to make a housing perfectly holding it all . First i would have used the housing that the SD adapter came with , but found out that it was very easy to split apart , so i could make a more smooth SD card insert in the case that i made to screw onto the side of the control unit. The 2 original screws can be used to hold this adapter case in place . It should not be necessary to print with support ,but you could use support for the holes to the screws. The design is meant to be printed laying flat on the large surface with the SD Card symbol down onto the heatbed . Link to the Micro SD to SD card from china : https://www.aliexpress.com/item/TF-Micro-SD-TO-SD-Card-Extension-Cable-Adapter-Flexible-Extender-MicroSD-To-SD-SDHC-SDXC/32735363715.html?spm=a2g0s.9042311.0.0.27424c4dH40Lt5
Statistics
Likes
21
Downloads
0