Power Strip Bracket Angled
Description
( I have another version of this model here on thingiverse ,that mounts under the table ,get it here : https://www.thingiverse.com/thing:3327440 ) If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : <a href="https://www.buymeacoffee.com/Mb1vZjXUG" target="_blank"><img src="https://bmc-cdn.nyc3.digitaloceanspaces.com/BMC-button-images/custom_images/black_img.png" alt="Buy Me A Coffee" style="height: auto !important;width: auto !important;" ></a> This is a set of angled brackets to mount/hold your power-strip 54mm x 38.5mm (EU model) at the edge off your workbench , table or where ever you need a power-strip to be placed for easy access . They fit perfectly the power-strips i have ,but i can't guarantee that it will fit yours ,place be aware of the size of 54mm x 38.5mm . There is a bracket-set to both the right and left side ,as to how one wants the cord to be placed. They are designed pretty strong ,because i do very often have to change power plugs since the power-strip sits on my workbench . To assure proper stability it is very important that you use all screw holes ,and i have put some double sided sticking tape between the table and the underside of the brackets ,just to be sure that the brackets stay in place when pulling the power plugs out .
Statistics
Likes
47
Downloads
0