Tools Holder Desk Stand
Description
This is a little but very tough and sturdy desk stand for small tools ,use it for scissors , pliers ,tweezers , screwdrivers and even your unbraco keys ,just use the adapter and your good to go . Total height is 152mm and the diameter is in top 124mm and the foot is 150mm in diameter. The 21 big holes is 20mm in diameter . If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : <a href="https://www.buymeacoffee.com/Mb1vZjXUG" target="_blank"><img src="https://bmc-cdn.nyc3.digitaloceanspaces.com/BMC-button-images/custom_images/black_img.png" alt="Buy Me A Coffee" style="height: auto !important;width: auto !important;" ></a> To assemble this you need the following : 4 pcs of m4 x 10-12mm hex socket bolts 4 pcs of m4 x 14-16mm hex socket bolts 8 pcs of m4 nuts Be aware of that there is a top and bottom of the tube piece ,you can see the difference in how far the m4 nuts are sitting up/down on the tube . If you assemble it wrong you can see the m4 nuts hole at the foot of the tools stand .
Statistics
Likes
25
Downloads
0