Filament Dry Box Ikea Samla 22L and 65L Simple and Quick to build
Description
My version of the Samla filmant storage is a minimalist design which is simple and quick-and-easy to print. Check out on YouTube how to build it, BOM with links in the description: https://youtu.be/ohHSY2zMV_o UPDATE: 22/10/2020 I had problems with the 65L version when fully loaded and wanted to move around because of the flexible bottom and weight the rods could slipped out from their place. Now I made a V2 from the Stand leg where it is fully closed around the M8 Threaded rod so it has no more chance to slip out. By the small spools I had no issues like this. I also made a stand leg for the hygrometer with slots to be more fancy. You can also find 2 Assembly helper distance holder for both boxes to speed up the assembly process. Just slap it onto the M8 Threaded rod and turn the nuts for quick placements. They are for 88mm wide 1kg spools and 101 mm wide 2kg spools. BOM for the 22l version for 1kg spools: To print: 2x 22l_stand_leg_x2 2x 22l_stand_leg_mirrored_x2 1x 22l_hole_template_M3 8x washer /spool 1x PTFE_cap /spool To buy: 1x 22l Samla box with cap 2x 338 mm M8 threaded rod (you can buy 1m and cut to the required length) 4x 608zz bearrings /spool 20 or 26x M8 thin nut (20 if you put 3 spools in the box or 26 if you can fit 4 in it) 8x M3x6 Screws 1 m 4 mm outer diameter PTFE tube 5 mm x 1 mm EPDM for the better isolation 1x temperature and humidity sensor BOM for the 65l version for 2kg-2.6kg spools To print: 2x 65l_stand_leg_x2_V2 2x 65l_stand_leg_mirrored_x2_V2 2x 65l_stander_middle_stabilizer or 6x if you want to be sure :) 2x 65l_stander_for_hygrometer 1x 65_hygrometer_frame 1x 65l_hole_template_M3 8x washer /spool 1x PTFE_cap /spool To buy: 1x 65l Samla box with cap 2x 480 mm M8 threaded rod (you can buy 1-2m and cut to the required length) 4x 608zz bearrings /spool 20 or 26 or 42x M8 thin nut (20 if you put 3 spools in the box, 26 if you can fit 4 in it, 42 if you fix all staneder leg also with nuts) 8x M3x6 Screws a few meter 4mm outer diameter PTFE tube 9 mm x 2 mm EPDM for the better isolation 1x temperature and humidity sensor For the clips I printed this thingi with 1 cm height: https://www.thingiverse.com/thing:2110134
Statistics
Likes
264
Downloads
0