Easy DIY Modular Agility Jumping Fence for Small Dogs and other Animals
Description
An animal friendly agility jump fence for small dogs, might also work for other small animals. Uses flower sticks that weight almost nothing so the fence falls off very easily and there is little chance that the dog will get hurt. They are also designed so the sticks will fall off easily and not get stuck. Recommended to make the pvc pipe top smooth or put a plug on top so it's not sharp in case the dog jumps over that part. I have not gotten there myself yet. It's pretty modular as seen in picture 3 and can be put on both sides of the pipe or in any direction or height. Stackable for different heights. Decide a suitable length for the pvc pipes and saw a long one into multiple pieces, they are not very expensive. I used flower sticks(support pins) and cut of the sharp edge. Mine are I think 60-70 cm long. Assembly per fence 1x Flower stick/flower support pin 2x pvc pipe pieces (20mm diameter). The ones I used is for drawing cables within house walls. They come pretty long to saw them to desired length. 2x m3 screws to attach the 3d printed part. 2x Dog Agility V3.stl printed out. Or more depending on if you want several difficulties. PLA works well, its designed to be durable. Easy to put up, Just put the flower stick on the ground like picture 4 and hammer the pipes into the ground next to both sides of the stick. Please post a make if you use it.
Statistics
Likes
10
Downloads
0