Fine Tuning Adapter for Knife Sharpening Jigs
Description
UPDATED - 31 MAR 2021 Fine tuning adapter for Hapstone / Edge Pro / Ruixin / Longmen / Other sharpening systems. This will enable you to adjust your sharpening very accurately in micro angles. I made 8 options to print: 1 : Hapstone models - M2, M3, R1, R2, V6, V8. 2 : Hapstone V7 (Or similar sharpener with 8mm Square rod) 3 : Edge Pro Apex (Could also possibly work on Edge Pro Professional) 4 : Ruixin Pro with 7mm rod (Can also be used together with my Guide Rod Holder (See the following link) - https://www.thingiverse.com/thing:3629639 5 : Ruixin Pro with 8mm rod (Can be used together with my Guide Rod Holder (See the following link) - https://www.thingiverse.com/thing:3629639 6 : Longmen or similar sharpener with 10mm rod 7 : Leadingedge Sharpener - Link https://www.thingiverse.com/thing:4135236 8 : Ruixin Pro RX-008 (6mm vertical rod) NOTES: (The Ruixin Pro knife sharpening jigs that item 4, 5, 8, and my Guide Rod Holder mentioned above refers to, can be purchased on EBay or AliExpress.) Print with NO supports - especially for the threads, or it will be extremely hard to remove the supports from the threads. Use a M4 brass threaded melt-in insert for the small hole at the bottom of the adapter, and use a M4 thumb screw to tighten it onto your sharpening system vertical guide rod. The base part (smooth round part) locks onto your vertical guide of your sharpening jig with a small thumb/screw lock, and the top knurled part threads onto it. Rotate it up and down with the knurled part for micro angle adjustment. If you find my designs useful, please go ahead and click on "Tip Designer" to the right of the photos at the top of this page. Proceeds will be used to purchase printing filament so I can keep designing and testing awesome new things that you might find useful. Thank you! UPDATES: 28 August 2020 - I added a fine tuning adapter for the Ruixin RX-008 system that has a 6mm vertical rod. File number 8. 28 August 2020 - The Hapstone R1 adapter also works for the Hapstone R2 and V8. 31 March 2021 - I upgraded and redesigned all of the fine tuning adapters for better comfort, usability and easier printing. Some more of my designs: https://www.thingiverse.com/leadingedge/designs Best All-round 3D Printable Knife and scissors sharpener with lots of attachments: https://www.thingiverse.com/thing:4135236
Statistics
Likes
35
Downloads
0