Tape Applicator
Description
One Thing I'Ve Found To Be Critical To Successful Bonding Of The Initial Layers Is Strongly Applied Tape. For My Initial Prints I Was Simply Rubbing The Tape Down By Hand Which Doesn'T Bond The Tape Well, And Is Likely To Leave Behind Traces Of Oils From Your Hands. I Switched To Using An Old Credit Card To Apply The Tape And Had A Lot Less Issues Of The First Layers Getting A Good Bond To The Bed. This 3D Printed Applicator Will Help You To Ensure Strong Adhesion Of Tape On The Print Bed. Due To The Harder Edge Than That Of A Credit Card, It Will Also "Rough Up" The Surface Slightly, Also Helping With Adhesion. ###Update 9/23 Updated Part File To Correct Scaling Issue In The Stl File.
Statistics
Likes
55
Downloads
0