Barenpark Board Lightweight Game Storage Insert
Description
Barenpark Storage insert, based on a number of google images for inspiration. Goals for this design: 1. light weight and low (<50g per part) filament use 2. sturdy enough for cardboard games+ 3. fast organization for setup 4. speed of print Print settings for results shown in pictures: 1. 0.28 mm layer height (CHeP magic number height) 2. 0 top layers 3. 0 bottom layers 4. 18% fast honeycomb infill (or similar pattern up to you) 5. 2 shells, extrusion width 0.48 mm. Walls are designed exactly at 0.96mm (2x shells) Result: 10-30g per tray, 30mins-1hr per tray, ~136grams for all trays. YMMV based on your print speeds. I aim for no higher than 60mm/sec, outline and infill speeds at 80% of that. For the tile holder: Very thin 1 extrusion width wall at 0.48mm. This turns out plenty strong for this use, just don't be a brute while handling. The internal walls might be a tad too high for 'finger access', please remix if it makes you mad! (I can't remember if I already did this)
Statistics
Likes
6
Downloads
0