Front License Plate Bracket with Extension (No Drill) tow hook
Description
This simple design allows you to install a Front license plate on your vehicle using the tow hook thread on the front of your bumper. By screwing a bolt on the inside (with the thread on facing front) simply find a nut that screws and fits. For my Jetta I used a cheap eBay tow hook and unscrew the other end, ending up with a bolt with two threaded sides. The Bracket was designed to use with USA-MEXICO plate size. I'm not sure about other countries. Choose either of both design for the spacer both fit the same nuts the only difference is the size and the design. One side fits the tow hook bolt and the other for the spacer. •For the bolt and nut that goes thru the plate bracket *Machine Bolt 3/8'' x 1-1/2 (you can use 5/8 in length as well) *Hex Nut 3/8 with 9 mm thickness •For the bolt and nut that goes thru the bumper (tow hook) *Bolt Thread Size: 5/8-8 RH Thread / M15.8xP3.175 *Hex Nut-Class 8-Thread Size: M12 with 10 mm thickness
Statistics
Likes
10
Downloads
0