MMU2 PC4-M10 SELECTOR PLATE COVER
Description
I got tired of fighting the bulbs directly at the selector plate on the MMU, mainly at the PC4-M4 connector. I had some PC4-M10 connectors that are through-bore like in the picture where the PTFE can pass all the way through. Since the filament is not getting stuck directly in the PTFE I figured i can route the PTFE directly to the selector plate and not have any issues. I CANNOT STRESS ENOUGH TO CUT A 30-40MM PIECE OF PTFE AND/OR USE A 1.5MM ALLEN KEY TO ALIGN THIS ONTO THE SELECTOR UPON INSTALL AND TIGHTENING. PETG recommended Print atleast at a .15 layer height, for better thread quality reduce to .10 layer height.
Statistics
Likes
64
Downloads
0