ikea lithophane support/abat jour led
Description
ITA: Semplice supporto per litofanie utilizzabile anche come abat jour. Occorrente: 1x IKEA FISKBO 10x15 (0.80eur) 1x IKEA LEDBERG led (7.95eur) istruzioni: Stampate il supporto, incollate il led sulla parte rotonda (si possono usare anche due piccole viti) e fondamentalmente avete finito. Stampate la vostra litofania e una volta messa nella cornice inserire nel supporto. ENG: Super simple lithophane support, also usable as abat jour. Bom: 1x IKEA FISKBO 10x15 (0.80eur) 1x IKEA LEDBERG led (7.95eur) Instructions: Print the support, glue the LED on the round part (you can also use two small screws) and basically you are done. Print your lithophane and put it in the frame than in the support. NB LA LITOFANIA DEVE ESSERE STAMPATA IN FORMATO 10X15CM COME UNA NORMALE FOTOGRAFIA LITHOPHANE NEEDED TO BE PRINTED IN 10X15CM FORMAT AS A STANDARD PICTURE Please respect non-commercial use license and give credits. For commercial use contact in private. If you like it, any tip is really welcome. Per favore, rispettate la licenza ad uso non commerciale. Per usi commerciali contattare in privato. Se vi dovesse essere tornato utile qualsiasi offerta è ben accetta.
Statistics
Likes
8
Downloads
0