LoPy4 Full Size Enclosure
Description
This is another version of my LoPy4 Enclosure. The other one is more compact (no extra room for batteries or other components. The full size one will allow room for batteries and perhaps other sensor circuitry. I did design this with the inspiration of the ThingsNetwork Gateway enclosure. So credit is due to them for sure. I just wanted to have a cool looking enclosure for the LoPy4s around the apartment. **Change log:** * **May 27, 2019 - Later that day...** I had to modify the enclosure. Now the LiPo battery is house underneath the Expansion Board. With this modification, a carrier plate was added. This means a little more hardware, but neater overall appearance. Also that entire assembly was moved to the center and down in the enclosure. Doing so makes room for an adhesive breadboard mounted above the Expansion Board. I also include a hole at the bottom to allow for a USB cable to pass through and plug into the LoPy4. * **May 27, 2019** - Printed the main part of the enclosure and posted a photo. The whole for the antenna is too large for the PyCom antenna. I ended up throwing a washer in. I will adjust that. Printing the lid now.
Statistics
Likes
4
Downloads
0