Crocodile Prusa Edition
Description
The friend of your printer Assembly Step 1 - Tools necessary for this chapter * Needle-nose pliers for magnets * 2.5mm Allen key for M3 screws Step 2 - preparing the components * Prepare following parts to build the crocodile: * Printed parts (6x), use PET-G, 0.2mm, 15% infill, no supports * M3x40 screw (2x) * M3n nut (2x) * 10x6x2mm magnet (2x, optional) * 20x6x2mm magnet (1x, optional) * 8mm steel ball (2x, optional) Step 3 * Insert two M3n nuts into the crocodile`s right hand and leg * Connect two body parts and secure via hands and legs with M3x40 screws, don`t use excessive force. * Don`t mix left and right hands and legs, otherwise you`ll have one ugly crocodile ;) * Insert 20x6x2mm magnet into the slot as shown, use Allen key to align the magnet inside the slot * Insert two 10x6x2mm magnets into slots on the upper side of the head * Insert two (eye)balls into holes, they will be held by the magnets Installation Place the crocodile onto the top of one of the Z-axis-tops using existing hex hole It`s Haribo time! Usage *Store some frequently used tools into jaws, hands and maybe on the tail of the crocodile * Enjoy!
Statistics
Likes
15
Downloads
0