Modular DS Cartridge Display Vault
Description
This is a modular display vault for Nintendo DS cartridges. Instead of having loose carts shoved in a box or filed away in a binder, I wanted to have the carts on display, and the more carts I obtain, I would like to add to the display. So I took the chance to design a modular display with a window. The display vault is designed to prevent the cart falling out of the interior bezel, in-between the acetate window and the vault, and should slot back into positon when rotated; and sits on the notches of the cart, not the contacts. Other vaults will be able to join together with the tessellating "teeth", and I also made borders to finish the set, as it were. Total print time was 4 hours in one piece with a preliminary bed to help with adhesion, no supports were needed at all due to the flat level, resolution at 0.1313mm, nozzle @210C and bed at 60C using PrimaValue PLA. Cutting the acetate was a bit dodgy and too thick, hence the small cracks during cutting but I will be using thinner acetate in later iterations. Borders are also included in this download to close off a row/column. "Closed" borders are to stop a row/column from proceeding, if this make sense.
Statistics
Likes
8
Downloads
0