Dual Razor Clip-on hook for 18mm/22mm/25mm cylindric slide bars
Description
For a long time we just put our razors in a soap dish that was attached to the slide bar. I bumped into it so many times and destroyed the razor blades in the process that I decided to build this simple piece of kit. It should snap easily onto your slide bar (there are 3 variants for 18mm, 22mm and 25mm which seem to be the most common ones where I live). I did only test the 25mm one and it works fine. If the holder slides down, you can put a rubber band across the holder as shown in the pictures to add some friction and help it to stay in place. They are designed around the measurements of Gillette® Venus® (not affiliated, not endorsed or endorsing) blades of the type "Extra Smooth" and it may have problems holding the ones with the larger ComfortGlide blades. Each holder is 52mm across, the space between the hooks is 25mm to 26mm(widest point). The depth of the hooks is 18mm. If you have a cylindrical slide bar that has weird measurements, shoot me a line. I am happy to adjust.
Statistics
Likes
25
Downloads
0