Indycar Speedway Rear Wing Fully Printable (1:1 Scale)
Description
**Indycar Speedway Rear Wing Fully Printable** </p> I am a french motorsport fan, so when Simon Pagenaud won the Indy 500 on May 26,2019, I had to celebrate it ! I personally don't know what's better than 3D Printing a model of the car's rear wing. Therefore I modeled it, now I'm in the process of printing it (pretty time consuming) and I am planing on painting it to the color of Pagenaud's car. **EDIT :** I'm finally (ironically) painting it to the colors of Alexander Rossi's car since I couldn't bring myself to paint all of this hard work, bright yellow. As you can see in the pictures, this model is MASSIVE ! </p> To put the *full scale* version together, you'll need : - Every STL parts given (including the pegs_x18.STL OR singlePeg.STL) - Some M4 rod (<100mm x4 and <340mm x2) - Six (6) 2mm diam. nails cut to <30mm in length - Six (6) flat-head 6mm M3 screws - You will also need some Super Glue or epoxy, I haven't figured out which is best yet (If you already figured out for yourself, tell me :] ) **EDIT**: Used both. - Four (4) self-drilling drywall anchor (with **countersunk** screws) </p> *Notes* : - The attachment part is still in the design fase. I am waiting to have the wing printed in order to model it. - The model has been cut to fit loosly in a 200x200x200mm print volume. If you're printer is able to print much bigger, feel free to cut and use the "**complete**" file. - When the symbole " < " is used, it means that you're suposed to include some tolerances (1 or 2mm will probably suffice). </p> If you have any question, go ahead and ask. I would be glad to answer you. </p> Jason S.
Statistics
Likes
8
Downloads
0