NFC Tag Resetter - Enclosure
Description
I built this to enclose my Arduino Uno filament tag resetter. I built this based on the following article. I strongly recommend trying if you are using any of the Da Vinci Jr. series! It was an awesomely fun project and opens your filament options. Edit: The spacing in the original box is all wrong (My caliper is dead :P #Digital). The new box should be correct. As well, I split the lid into two parts for airflow and so you can see the blinky lights! https://www.instructables.com/id/Using-3rd-Party-Filament-With-Da-Vinci-Jr/ Here are links to newer listings of the pieces needed for the build. https://www.amazon.com/Elegoo-EL-CB-001-ATmega328P-ATMEGA16U2-Arduino/dp/B01EWOE0UU/ref=pd_ybh_a_67?_encoding=UTF8&psc=1&refRID=A5W4K2MZF0S1J4DACA7A https://www.amazon.com/25-Stickers-Strip-NTAG213-Blank/dp/B01N387KOM/ref=pd_ybh_a_74?_encoding=UTF8&psc=1&refRID=95Z90NYPPY382DS6EVDS https://www.amazon.com/HiLetgo-Communication-Arduino-Raspberry-Android/dp/B01I1J17LC/ref=pd_ybh_a_70?_encoding=UTF8&psc=1&refRID=A5W4K2MZF0S1J4DACA7A
Statistics
Likes
2
Downloads
0