House of Ramps
Description
Sklett housing for Arduino mega with ramps, or re-arm with ramps. Suitable for Arduino mega 2560; 12V MKS mega 2560; 7 - 25V RE ARM; 10 - 30V Intended for 5 Smoother. Mesh part 115/50 / 215mm, 12V / 40A. For the 24V junkies, 24V / 15A, 17A, 20A, with the same dimensions. Part 1: Board; for 2 pieces Mosfet, 5 pieces Smoother, as well as controller. about 8h, at 40mm / s, Part 2: LCD case about 8h 30min, at 40mm / s, without support.In 3 versions, all printable !!! Part 3: Power Supply Case Support at 80 degrees, so only in the power switch area a support structure is printed. Part 4: Fan housing for 2 pieces 50x10 fans; Suction. Part 5: Bracket for front attachment Part 6: Case cap, first good version; Printingtime 12hours at 60 mm/s Pictures pre-version, now changed and usable. Setting for support 80 degrees, use support only where construction necessarily requires it, otherwise it is a poor design for 3D printing.Beta finished, but not properly thought out. LCD Distance for LCD 12864 Reprap_Full_Graphik_Display I have come up with some improvements in the construction of the case cap that require a redesign of the carrier plate. Will probably bring a second edition.more carrier plates, for anet board, MKS board and Tangoboard (I order it) or something. All screws size M3. Bore diameter 2.4mm (I have forgot one to drill). Screws for board, Mosfet, Smoother, LCD housing (side), fan housing 8mm long. LCD is attached with 12mm long screws (4 pieces). At the connection board power supply / bracket, the screws are 10-12mm long. The small fans (50x10mm) are fixed with 15mm long screws, the big fan (120mm), depending on the thickness 20mm to 30mm long. I hope this information is sufficient, if not just post me. Thank`s Innovation Sklett_Board_NEU_Lilly; with Lilly pads, because after I had used up the material had problems with the adhesion, in various places, these points were gradually provided with Lilly pads. Same material, same manufacturer only different color, and then everything is different !!!
Statistics
Likes
18
Downloads
0